GIGABYTE Alaplap S1700 H610M D3W DDR4 INTEL H610, mATX CPU LGA1700 socket:
Support for the 14th, 13th, and 12th Generation IntelŽ Core?,PentiumŽ Gold and
CeleronŽ Processors (Go to GIGABYTE's website for the latest CPU support list.)
L3 cache varies with CPU Chipset IntelŽ H610 Express Chipset Memory
Support for DDR4 3200/3000/2933/2666/2400/2133 MT/s memory modules 2 x DDR4
DIMM sockets supporting up to 64 GB (32 GB single DIMM capacity)of system memory
Dual channel memory architecture Support for ECC Un-buffered DIMM 1Rx8/2Rx8
memory modules (operate innon-ECC mode) Support for non-ECC Un-buffered DIMM
1Rx8/2Rx8/1Rx16 memory modules Support for Extreme Memory Profile (XMP) memory
modules (The CPU and memory configuration may affect the supported memory
types, datarate (speed), and number of DRAM modules, please refer to Memory
Support List on GIGABYTE's website for more information.) Onboard Graphics
Integrated Graphics Processor-IntelŽ HD Graphics support: - 1 x DisplayPort,
supporting a maximum resolution of 4096x2304@60 Hz * Support for DisplayPort
1.2 version and HDCP 2.3. - 1 x HDMI port, supporting a maximum resolution of
4096x2160@60 Hz * Support for HDMI 2.1 version and HDCP 2.3. ** Support for
native HDMI 2.1 TMDS compatible ports. (Graphics specifications may vary
depending on CPU support.) Audio RealtekŽ Audio CODEC High Definition Audio
2/4/5.1/7.1-channel * You can change the functionality of an audio jack using
the audio software. To configure 7.1-channel audio, access the audio software
for audio settings. LAN RealtekŽ GbE LAN chip (1 Gbps/100 Mbps/10 Mbps)
Expansion Slots CPU: - 1 x PCI Express x16 slot, supporting PCIe 4.0 and
running at x16 Chipset: - 1 x PCI Express x1 slot, supporting PCIe 3.0 and
running at x1 - 1 x M.2 Socket 1 connector, for the CNVi wireless communication
module (M2_WIFI) Storage Interface Chipset: - 1 x M.2 connector (Socket
3, M key, type 2280 PCIe 3.0 x4/x2 SSD support) - 4 x SATA 6Gb/s connectors
USB Chipset: 1 x USB Type-CŽ port with USB 3.2 Gen 1 support, available
through theinternal USB header - 3 x USB 3.2 Gen 1 ports (1 ports on the back
panel, 2 ports available through the internal USB header) - 2 x USB 2.0/1.1
ports available through the internal USB header Chipset+1 USB 2.0 Hub: - 4 x
USB 2.0/1.1 ports on the back panel Internal I/O Connectors 1 x 24-pin ATX
main power connector 1 x 8-pin ATX 12V power connector 1 x CPU fan header 2 x
system fan headers 1 x M.2 Socket 3 connector 4 x SATA 6Gb/s connectors 1 x
front panel header 1 x front panel audio header 1 x USB Type-CŽ header, with
USB 3.2 Gen 1 support 1 x USB 3.2 Gen 1 header 1 x USB 2.0/1.1 header 1 x
Trusted Platform Module header (For the GC-TPM2.0 SPI/GC-TPM2.0 SPI
2.0/GC-TPM2.0 SPI V2 module only) 1 x serial port header 1 x Clear CMOS jumper
Back Panel Connectors 1 x DisplayPort 1 x HDMI port 1 x USB 3.2 Gen 1
port 4 x USB 2.0/1.1 ports 1 x RJ-45 port 3 x audio jacks I/O Controller
iTEŽ I/O Controller Chip H/W Monitoring Voltage detection Temperature
detection Fan speed detection Water cooling flow rate detection Fan fail
warning Fan speed control * Whether the fan speed control function is
supported will depend on the fan you install. BIOS 1 x 128 Mbit flash Use
of licensed AMI UEFI BIOS PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0
Unique Features Support for GIGABYTE Control Center (GCC) * Available
applications in GCC may vary by motherboard model. Supported functions of each
application may also vary depending on motherboard specifications. Support
for Q-Flash Bundled Software NortonŽ Internet Security (OEM version) LAN
bandwidth management software Operating System Support for Windows 11
64-bit Support for Windows 10 64-bit Form Factor Micro ATX Form Factor;
24.4cm x 22.0cm