The SA series of active amplifier module, designed for active systems, using
Class D circuit, modularized design, independent PWM fixed frequency modulation,
to reduce the difference frequency of the self-excited circuit and multichannel
interference. Built-in two channel 24 bit / 96 k sampling frequency of the high
performance DSP processor, RS485 connector or network adjustment, input 31
section PEQ, output 10 section PEQ, input/output delay 0 to 25 ms is adjustable,
and bringing the independent band-pass filter, all-pass filter, independent
pressure limit, the noise control. The product has large power and low
distortion, and the whole shielding sealing box makes the product meet the
requirements of EMC and product safety
level. MODEL SA2.36 SA2.68 SA2.68II SA3.336 SA3.448 Output
Power 8
Ohms 300W+600W   600W+800W 600W+800W 300W+300W+600W 400W+400W+800W Output
Power 4
Ohms 450W+900W 900W+1200W 900W+1200W 450W+450W+900W 600W+600W+1200W DSP / / DSP DSP DSP Frequency
Response 20Hz-20kHz         Input
Impedance 20k
ohm/Balanced,10kohm/un-Balanced       S/N
Ratio &ge;95dB         THD <0.5%         Damping
Factor/8ohm/1kHz ?200         Slew
Rate 20V/uS         Protection Soft
Start,Short Circuit,Limiter,DC Fault,AC Line Fuse,Thermal
Cut       Mains Power supply AC:110-240V/
50Hz-60Hz          Net
Weight 3.6Kg 3.6Kg 3.6Kg 3.8Kg 3.8Kg