The Victron Energy voltage converter is an efficient and reliable voltage
converter built on a proven and field-tested platform. The inverter incorporates
a robust toroidal transformer that has proven its reliability in Victron Energy
inverters for many years. Key Features: Easily accessible terminals:
Installation is easier than ever because the terminals are now more accessible
to the installer. VE.Direct: The VE.Direct port can be connected to: Computer
(VE.Direct to USB interface cable required) Smartphones, tablets, MacBooks and
other Apple and Android devices (VE.Direct Bluetooth Smart dongle required)
Fully configurable: Low battery alarm triggering and level reset Low battery
shutdown and restart levels Dynamic shutdown: load-dependent shutdown levels
Output voltage 210 - 245 V Frequency 50 Hz or 60 Hz ECO mode on/off and ECO mode
sensing level Monitoring: Input and output voltages, % load and alarms Proven
reliability: The full bridge and toroidal transformer topology has proven its
reliability over many years. The inverters are short-circuit proof and protected
against overheating, whether due to overload or high ambient temperature. High
starting performance: Required to start loads such as inverters for LED bulbs,
halogen bulbs, refrigerators or power tools. ECO mode: In ECO mode, the inverter
switches to standby mode when the load drops below a preset value. In standby
mode, the inverter turns on for a short period of time every 2.5 seconds
(adjustable). If the load exceeds the preset level, the inverter will remain on.
Remote on/off: The remote switch can be connected to the two-pole connector or
between the battery plus and left contact of the two-pole connector. LED
diagnostics: The status LEDs can be used to diagnose the device, see
instructions for use. Victron Connect: The VictronConnect application is used to
monitor, control and configure the inverter. The app can be installed on a
phone, tablet or computer. The app is available for Android, iOS, Windows and
macOS. The app communicates either via Bluetooth or via a USB interface with the
VE.Direct port. Technical parameters: Output voltage: 230 V AC ą 2% 50 Hz or 60
Hz ą 0.1%. continuous power at 25 şC: 1600 VA / 1300 W Peak power: 2200 W max.
efficiency: 92 % self-consumption at zero load: max. 8 W self-consumption at
zero load in ECO mode: max. 0.6 W 230 V AC connection: screw terminals Operating
temperature range: -40 to +65şC (fan-assisted cooling) Humidity
(non-condensing): max. 95% protection class: IP21 weight: 8.86 kg Dimension: 190
x 425 x 285 mm