Voltage converter SINUS Phoenix 1200VA 24V VE.Direct Victron Energy 24V/1200VA
VE.Direct. Fully programmable 24V/1200VA pure sine wave inverter with toroidal
transformer, built-in VE.Direct interface and ECO mode. The Victron Energy
voltage converter is an efficient and reliable voltage converter built on a
proven and field-tested platform. The inverter incorporates a robust toroidal
transformer that has proven its reliability in Victron Energy inverters for many
years. Product parameters: - Easily accessible terminals: installation is easier
than ever because terminals are now more accessible to the installer. VE.Direct:
The VE.Direct port can be connected to: - computer (VE.Direct to USB interface
cable required) - Smartphones, tablets, MacBooks and other Apple and Android
devices (VE.Direct Bluetooth Smart dongle required) Fully configurable: - Low
battery alarm triggering and level reset - Low battery shutdown and restart
levels - Dynamic shutdown: load-dependent shutdown level - output voltage 210 -
245 V - frequency 50 Hz or 60 Hz - ECO mode on/off and ECO mode sensing level
Tracking: - Input and output voltages, % load and alarms Proven reliability: -
Full bridge and toroidal transformer topology has proven its reliability over
many years. The inverters are short-circuit proof and protected against
overheating, whether due to overload or high ambient temperature. High starting
performance: - Required to start loads such as inverters for LED bulbs, halogen
bulbs, refrigerators or power tools. ECO mode: In ECO mode, the inverter
switches to standby mode when the load drops below a preset value. In standby
mode, the inverter turns on for a short period of time every 2.5 seconds
(adjustable). If the load exceeds the preset level, the inverter will remain on.
Remote on/off: The remote switch can be connected to the two-pole connector or
between the battery plus and left contact of the two-pole connector. LED
diagnostics: The status LEDs can be used to diagnose the device, see
instructions for use. Victron Connect: The VictronConnect application is used to
monitor, control and configure the inverter. The app can be installed on a
phone, tablet or computer. The app is available for Android, iOS, Windows and
macOS. The app communicates either via Bluetooth or via a USB interface with the
VE.Direct port. Technical parameters: - 230 V AC +/- 3% 50 Hz or 60 Hz +/- 0.1%.
- continuous power at 25 şC: 1200 VA / 1000 W - Peak power: 2200 W - max.
efficiency: 91% - self-consumption at zero load: max 8 W - self-consumption in
ECO mode: max 1.5 W - 230 V AC connection: Schuko (CEE 7/4) - Operating
temperature range: -40 to +65şC (fan-assisted cooling) - Humidity
(non-condensing): max. 95% - Protection class: IP21 - weight: 7.4 kg -
Dimension: 117 x 232 x 327 mm