Victron Energy 24V/2000VA Smart inverter Fully programmable 24V/2000VA inverter
with pure sine wave, built-in Bluetooth Smart, wireless setup and ECO mode. The
Victron Energy Smart voltage converter is an efficient and reliable voltage
converter built on a proven and field-tested inverter platform, but in a new
design with an all-metal housing. It is powerful enough to power most common
appliances in a car, boat, RV or home. The toroidal transformer provides high
peak power surge capacity, stable voltage, frequency and high quality sine wave.
Product Parameters: Easily accessible terminals: Installation is easier than
ever because the terminals are now more accessible to the installer. Built-in
Bluetooth: Fully configurable via tablet or smartphone, configure alarms, alarm
relays, voltage interrupts, output voltage, frequency, eco-mode and more
directly from the app from VictronConnect. - Low battery voltage alarm - Low
battery shutdown and restart levels - Dynamic shutdown: load-dependent shutdown
level - output voltage: 230 VAC ą2% - Frequency: 50 Hz or 60 Hz - ECO mode
on/off and ECO mode sensing level - alarm relay - monitoring: input and output
voltage, load and alarms VE.Direct: Using the VE.Direct port, you can connect to
a computer (VE.Direct to USB interface cable required) and configure and monitor
the same parameters. Proven reliability: The full bridge and toroidal
transformer topology has proven its reliability over many years. The inverters
are short-circuit proof and protected against overheating, whether due to
overload or high ambient temperature. High starting performance: Required to
start loads such as inverters for LED bulbs, halogen bulbs, refrigerators or
power tools. ECO mode: In ECO mode, the inverter switches to standby mode when
the load drops below a preset value. In standby mode, the inverter turns on for
a short period of time every 2.5 seconds (adjustable). If the load exceeds the
preset level, the inverter will remain on. Remote on/off: A remote switch or
relay contact can be connected to the two-pole connector. Alternatively, the H
terminal (left) of the two-pole connector can be switched to battery plus or the
L terminal (right) of the two-pole connector can be switched to battery minus.
LED diagnostics: The status LEDs can be used to diagnose the device, see the
instruction manual. Victron Connect: The VictronConnect application is used to
monitor, control and configure the inverter. The app can be installed on a
phone, tablet or computer. The app is available for Android, iOS, Windows and
macOS. The app communicates either via Bluetooth or via a USB interface with the
VE.Direct port. Technical parameters: - Output voltage: 230 V AC ą 2% 50 Hz or
60 Hz ą 0.1%. - continuous power at 25 şC: 2000 VA / 1600 W - Peak power: 4000 W
- max. efficiency: 94 % - self-consumption at zero load: max. 9 W -
self-consumption at zero load in ECO mode: max. 1.3 W - 230 V AC connection:
screw terminals - Operating temperature range: -40 to +65şC (fan-assisted
cooling) - Humidity (non-condensing): max. 95% - protection class: IP21 -
weight: 13 kg - Dimension: 485 x 219 x 125 mm