Attention! The installation of the solar system must only be carried out by a
qualified person! WARNING: The photo of the assembly is for illustration only.
The components supplied in reality may differ from those shown in the picture.
This does not affect the listed parameters or the function of the assembly.
Growatt INFINITY 2000 PRO Specifications: Module capacity : 2.048 (kWh) Battery
type : HV (49V+) Cell type : LiFePO4 Manufacturer : Growatt Rated voltage : 230
(V) Maximum operating voltage : 230 (V) Minimum operating voltage : 1 (V) Degree
of protection : No Capacity guarantee - number of cycles : 4000 (cycles) Maximum
number of modules : 1 Maximum operating temperature : 50 (°C) Minimum number of
modules : 1 Minimum operating temperature : -30 (°C) Height : 247 (mm) Solar
panel JKM420N-54HL4-V Technical parameters: - Rated power: 420 W - type:
monocrystalline - module efficiency: 21,51 % - maximum current (Imp): 13,14 A -
Maximum supply voltage (Vmp): 31,97 V - no-load voltage (Voc): 38,54 V -
Short-circuit current (ISC): 13,59 A - Maximum system voltage: 1500VDC (IEC) -
Output tolerance: 0~+3% - Connector type: MC4/MC4 compatible - Front glass:
3.2mm, anti-reflective coating, high transmittance, low iron, tempered glass -
Protection degree: IP68 - Module dimensions: 1754×1096×30 mm - cell type:
Mono-crystalline - number of cells: 108 (6 x 18) - dimensions: 1722×1134×35 mm -
weight: 22 kg - frame: anodized aluminium alloy - frame colour: black Average
daily energy production in kWh in January approx. 450 Wh/day in May approx. 1550
Wh /day in July approx. 1650 Wh/day in September approx. 1290 Wh/day in December
approx. 400 Wh/day For the whole year the system can produce about 300 kWh. The
calculated output is assuming a south-facing orientation, no shading, with a
panel inclination of 35 degrees The solar system includes the following
components: 1 x Growatt INFINITY 2000 PRO charging station 2 x Solar panel
JKM420N-54HL4-V 2 x coupler for parallel connection of panels The panels are
connected to the station in parallel connection. The assembly does not include
mounting elements. It is necessary to order them separately according to the
planned method of placement.