New in the Victron Energy offer. Fully programmable sine wave inverter
12V/1600VA with built-in Bluetooth, wireless settings and ECO mode. Proven
reliability of professional Victron Energy inverters High starting power The
power required to start loads such as power converters for LED lamps, halogen
lamps or power tools. The drive incorporates a robust toroidal transformer which
has proven its reliability in Victron Energy drives for many years. The
inverters are short-circuit proof and protected against overheating, either due
to overload or high ambient temperatures. Built-in Bluetooth technology and
Victron Connect App This inverter has built-in Bluetooth technology and is fully
configurable via tablet or smartphone. This is a completely unique function and
you can therefore set the parameters of the converter and monitor the operation
simply wirelessly. Setting options: ? Low battery voltage alarm ? Setting the
voltage level for switching off and restarting the inverter when the battery is
discharged ? Dynamic disconnection from the battery during discharge: the
voltage level for disconnection is dependent on the size of the load ? Output
voltage: 210 - 245V ? Frequency: 50 Hz or 60 Hz ? ECO mode on / off and ECO
shooting level ? Alarm relay Monitoring: ? Input and output voltage, load level
and alarms Download the application for free under the name VictronConnect app
in the App Store or Google Play. The application can be downloaded from this
software page of the manufacturer Victron Energy: If you prefer to set up and
monitor via cable and PC, the inverter is equipped with a VE.Direct
communication port that you can connect to using a VE.Direct to USB cable ECO
mode In ECO mode - when the load power drops below the preset value, the
inverter switches to standby mode (it goes to sleep and the inverter's own
consumption is then only approx. 0.6W). In standby mode with very low
self-consumption, the inverter will then switch on periodically for a short time
(adjustable parameter, default: every 2.5 seconds). If the load power exceeds
the preset value, the inverter will turn on again. Thanks to this function, you
save a large amount of energy that the inverter would otherwise consume for its
operation. Remote on/off A remote on/off switch or relay contact can be
connected to the two-pole connector. Technical parameters: Continuous output
power at 25°C (VA): 1600 Continuous active power at 25°C / 40°C (W): 1300/1200
Peak active power (W): 3000 Weight (kg): 12 Dimensions hxwxd (mm): 485x219x125
Technical specifications can be found in the downloadable documents below