The GETI emergency power supply system (EPS - Emergency Power Supply) is a
device that provides a source of alternating voltage in the event of a power
failure. You can use the emergency power supply as a backup source for various
pumps, automatic boilers, feeders, emergency lighting, camera systems and more.
In normal mode, the connected device is powered directly from the network, and
in the event of a failure, the emergency power system automatically switches to
inverter mode. The connected device is then powered by the connected battery. If
the power supply is not restored, the system EPS may be switched off at the
moment when the voltage of the connected battery drops to a value of around
10.2V ą 0.3V. This is to protect the battery from deep discharge and subsequent
damage. The EPS is equipped with a clear color display, a pure sine voltage
converter based on a toroidal transformer and a fast 32-bit processor. Warning:
the contacts of the connected battery must be properly protected against:
contact with persons, foreign bodies, contact with other parts of the system or
short circuits. Product description: - inverter, UPS, AVR and charger in one
device - clear color display - high efficiency due to construction with toroidal
transformer - high charging current - protection against overload, short
circuit, overcharging and reverse polarity. Technical parameters: - type of
backup batteries: AGM, GEL - backup battery voltage: 12V DC - rated capacity:
800VA - rated power: 500W - transformer: toroid - input voltage: 230 V AC - 50Hz
- output voltage: 230V AC ą 3% - 50Hz / pure sine wave - charging current: 5 A /
10 A optional - charging voltage: 13.6V ą 0.3V - low battery voltage limit: 11 V
ą 0.3V - battery low voltage protection point: 10.5V ą 0.3V - transfer time: < 4
ms - cooling system: Yes - operating temperature: 0 ~ 40°C - relative humidity:
10% ~ 90% - storage temperature: -15°~ 45°C - cable length to battery: 2 x 75
cm, M8 - dimension: 145x180x237 mm - weight: 6,50 kg The gel type Geti lead-acid
battery is especially suitable for solar and wind energy systems and caravans,
but also as a battery replacement for UPS backup systems, backup power supplies,
burglar alarm applications, EPS, telecommunications, mobile warning and
signaling devices, etc. It is a maintenance-free, hermetically sealed battery
which allows any working position. Technical parameters: - production
technology: VRLA - valve regulated lead acid - type: GEL - voltage: 12 V -
capacity: 100 Ah - dimensions: 328 x 172 x 217 mm - overall height (with
terminals): 220 mm - weight: approx. 29.5 kg - internal resistance (fully
charged battery): 5 m? - self-discharge process