The GETI emergency power supply system (EPS - Emergency Power Supply) is a
device that provides a source of alternating voltage in the event of a power
failure. You can use the Power Supply System (EPS) as a backup source for
various pumps, automatic boilers, feeders, emergency lighting, camera systems
and more. In normal mode, the connected device is powered directly from the
network, and in the event of a failure, the emergency power system automatically
switches to inverter mode. The connected device is then powered by the connected
battery. If the power supply is not restored, the system (EPS) may switch off
when the voltage of the connected battery drops to a value of around 10.2V ą
0.3V. This is to protect the battery from deep discharge and subsequent damage.
The EPS is equipped with a clear colour display, a pure sine voltage converter
based on a toroidal transformer and a fast 32-bit processor. Warning: The
contacts of the connected battery must be properly protected against accidental
contact by persons, foreign objects, contact with other parts of the system, or
short circuits. Product description: - inverter, UPS, AVR and charger in one
device - clear LED colour display - high efficiency due to construction with
toroidal transformer - high charging current - protection against overload,
short circuit, overcharging and reverse polarity. Technical parameters: - type
of backup batteries: AGM, GEL - backup battery voltage: 12V DC - rated capacity:
1000VA - rated power: 700W - transformer: toroid - input voltage: 230 V AC -
50Hz - output voltage: 220V AC ą 3% - 50Hz / pure sine wave - charging current:
10A/ 20A optional - charging voltage: 13.8V ą 0.3V - low battery voltage limit:
10.9V ą 0.3V - battery low voltage protection point: 10.2V ą 0.3V - transfer
time: < 4 ms - cooling system: Yes - operating temperature: 0 ~ 40°C - relative
humidity: 10% ~ 90% - storage temperature: -15°~ 45°C - cable length to battery:
2 x 75 cm, M8 - dimension: 311 x 232 x 140 mm - weight: 6,5kg Packaging: box 1pc
/ carton 2pc Carton weight: 8 kg The gel type Geti lead-acid battery is
especially suitable for solar and wind energy systems and caravans, but also as
a replacement for batteries for UPS backup systems, backup power supplies,
burglar alarm applications, EPS, telecommunications, mobile warning and
signaling devices, etc. It is a maintenance-free, hermetically sealed battery,
which allows any working position. Technical parameters: - production
technology: VRLA - valve regulated lead acid - type: GEL - voltage: 12 V -
capacity: 120 Ah - dimensions: 407 x 177 x 222 mm - overall height (with
terminals): 225 mm - weight: approx. 35 kg - internal resistance (fully charged
battery): 4 m? - self-discharge process