The Ermenrich Seek TV50 is suitable for a wide range of applications. When
inspecting electrical equipment with a thermal imager, hidden defects, such as
overheated contacts, can be detected. When inspecting industrial and residential
buildings, the Ermenrich Seek TV50 thermal imager helps to find heat leaks on
facades and foundations. During construction work, it can be used to check the
installation of underfloor heating, radiators and water heaters. The thermal
imager can also be useful in car servicing and repairs and in pest control (when
searching for pests in a building). The Ermenrich Seek TV50 thermal imager has a
temperature measurement range of -20 to +400 °C. The thermal imager is equipped
with a thermal imaging sensor with a resolution of 32x32 pixels (total 1024
pixels) and a visible light camera with a resolution of 2 Mpix. There are 4
modes available: infrared mode, infrared edge detection mode, dual light vision
mode and visible light mode. You can also choose from 7 color palettes. The
image is displayed on the built-in color screen. Control and settings are
carried out using four buttons below the screen and one button on the handle.
There is a photo shooting function - photos are saved to a memory card. The
device is held in the hand, there is no tripod mount. Power is provided by a
rechargeable battery. 32x32 pix thermal imaging sensor and 2 Mpix camera,
adjustable emissivity 7 color palettes, 4 modes, merging of visible and infrared
images High measurement accuracy in the range of ?20 to +400 °C Image sensor
function, data is saved to a memory card Shock-resistant body, powered by
rechargeable batteries Technical parameters: Type of thermal imaging device:
manual Resolution of microbolometric matrix, px: 32?32 Spectral range, ?m: 8?14
Speed: ?9 Temperature measurement range, °?: -20 ? 400 Temperature error, %:
accuracy: 0... +400 °C: ą1.8 °C; ?20... ?0.9°C: ą3°C, resolution: 0.1°C
Temperature sensitivity (NETD), mK: 150 Color palettes: hot black, hot white,
hot red, iron red, cold colored, rainbow, lava Field of view
(horizontal)x(vertical), °: 33 (horizontal), 18 mrad (instantaneous) Fusion of
optical and thermal images: + Display: LCD, 2.4? TFT Display resolution, px:
320x240 Operating mode: IR mode, IR edge detection mode, dual vision mode,
visible light mode Power supply: 2600 mAh, 3.7V, charging via microUSB cable
(included) Maximum load (impact), g: fall from a height of up to 1 meter Camera
temperature range, °C: -10...+45 Built-in recorder Memory: 16 GB memory card
(included) Image format: *.bmp Interface connectors: microUSB Case/case/bag
included: case Auto power off function Low battery indicator Camera resolution:
2 Mpix Adjustable emissivity from 0.1 to 0.99 Response time: 150 ms Set
contents: Thermal camera 16 GB memory card MicroUSB cable Case User manual and
warranty card