Műszaki leírás Bemeneti feszültség: 230V AC / 50Hz páka feszültség: 24 V
Teljesítmény: 60 W (max. 90 W) Állítható hőmérséklet: 160-480 ° C Kijelző:
LED-es színes Description The ZD-8936 soldering station (micro solder) was
designed for lead-free soldering in the temperature range of 50 to 480 ° C. The
device is intended for use in the field of electronic research, schools and
production, especially in the repair and soldering of electronic devices and
telecommunications equipment. It is controlled automatically by a
microprocessor. The seven-segment three-digit LED display shows the actual
temperature as well as the preset tip temperature. The tip with a heating
element at a voltage of 24V and a sensor of the actual temperature, has a power
input of 60W (during heating it can automatically increase up to 130W).
Therefore, it only takes about 30 seconds to warm from room temperature to 350 °
C. Digital electronics and a feedback sensor ensure an almost constant set
temperature, regardless of the increased heat consumption by soldering larger
components. The ZD-8936 soldering station with a wide selection of N9-16 to
N9-56 series soldering tips can be used anywhere in the electronics industry.
Solder handle coated with rubber for protection against heat during long-term
work. Product parameters: - setting the tip temperature in the range of 50 to
480 ° C using the UP - DOWN buttons - a feedback sensor ensuring that the set
tip temperature does not fluctuate - display of set and actual temperature on
the display - tip heating with low voltage 24 V - rubber, non-slip handle cover
- extremely short warm-up time - easy tip replacement - ON / OFF switch - sponge
for wiping the tip - holder for solder Technical parameters : - supply voltage:
230V AC / 50Hz - power consumption: 60 W, short-term when warming up max. 130 W
- heating element for voltage: 24 V - tip temperature feedback control -
adjustable temperature: 50 - 480 ° C - three-digit LED display - weight: 1.9kg -
dimensions: 12.5cm (h) x 11cm (w) x 15.5cm (hl)