GIGABYTE Alaplap S1700 Z790 AORUS MASTER X INTEL Z790, E-ATX LGA1700 socket:
Support for the 13th, and 12th Generation IntelŽ Core?, PentiumŽ Gold and
CeleronŽ Processors L3 cache varies with CPU * Please refer to CPU Support List
for more information. IntelŽ Z790 Express Chipset Support for DDR5 8266(O.C) /
8200(O.C) / 8000(O.C) / 7950(O.C) / 7900(O.C) / 7800(O.C) / 7600(O.C.) /
7400(O.C.) / 7200(O.C.) / 7000(O.C.) / 6800(O.C.) / 6600(O.C.) / 6400(O.C.) /
6200(O.C.) / 6000(O.C.) / 5800(O.C.) / 5600(O.C.) / 5400(O.C.) / 5200(O.C.) /
4800 / 4000 MT/s memory modules 4 x DDR5 DIMM sockets supporting up to 192 GB
(48 GB single DIMM capacity) of system memory Dual channel memory architecture
Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules (operate in non-ECC
mode) Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules
Support for Extreme Memory Profile (XMP) memory modules (The CPU and memory
configuration may affect the supported memory types, data rate (speed), and
number of DRAM modules, please refer to Memory Support List for more
information.) Integrated Graphics Processor-IntelŽ HD Graphics support: - 1 x
DisplayPort, supporting a maximum resolution of 4096x2304@60 Hz * Support for
DisplayPort 1.2 version and HDCP 2.3 RealtekŽ ALC1220-VB CODEC * The front panel
line out jack supports DSD audio. ESS ES9118 DAC chip Support for DTS:XŽ Ultra
High Definition Audio 2/4/5.1-channel * You can change the functionality of an
audio jack using the audio software. To configure 5.1-channel audio, access the
audio software for audio settings. Support for S/PDIF Out MarvellŽ AQtion
AQC113C 10GbE LAN chip (10 Gbps/5 Gbps/2.5 Gbps/1 Gbps/100 Mbps) QualcommŽ Wi-Fi
7 QCNCM865 (PCB rev. 1.0) - 802.11a, b, g, n, ac, ax, be, supporting 2.4/5/6 GHz
carrier frequency bands - BLUETOOTH 5.3 - Support for 11be 320MHz wireless
standard (Actual data rate may vary depending on environment and equipment.)
CPU: - 1 x PCI Express x16 slot, supporting PCIe 5.0 and running at x16
(PCIEX16) * The PCIEX16 slot shares bandwidth with the M2C_CPU connector. The
PCIEX16 slot operates at up to x8 mode when a device is installed in the M2C_CPU
connector. * For optimum performance, if only one PCI Express graphics card is
to be installed, be sure to install it in the PCIEX16 slot. Chipset: - 1 x PCI
Express x16 slot, supporting PCIe 3.0 and running at x4 (PCIEX4) - 1 x PCI
Express x16 slot, supporting PCIe 3.0 and running at x1 (PCIEX1) CPU: - 1 x M.2
connector (Socket 3, M key, type 25110/2280 PCIe 5.0 x4/x2 SSD support)
(M2C_CPU) - 1 x M.2 connector (Socket 3, M key, type 22110/2280 PCIe 4.0 x4/x2
SSD support) (M2A_CPU) Chipset: - 1 x M.2 connector (Socket 3, M key, type
22110/2280 PCIe 4.0 x4/x2 SSD support) (M2Q_SB) - 1 x M.2 connector (Socket 3, M
key, type 2280 PCIe 4.0 x4/x2 SSD support)(M2P_SB) - 1 x M.2 connector (Socket
3, M key, type 2280 SATA and PCIe 4.0 x4/x2 SSD support) (M2M_SB) - 4 x SATA
6Gb/s connectors RAID 0, RAID 1, RAID5, and RAID 10 support for NVMe SSD storage
devices RAID 0, RAID 1, RAID5, and RAID 10 support for SATA storage devices
Chipset: - 3 x USB Type-CŽ ports, with USB 3.2 Gen 2x2 support (2 ports on the
back panel, 1 port available through the internal USB header) Chipset+2 USB 3.2
Gen 2 Hubs: - 1 x USB Type-CŽ port on the back panel, with USB 3.2 Gen 1 support
- 7 x USB 3.2 Gen 2 Type-A ports (red) on the back panel Chipset+2 USB 3.2 Gen 1
Hubs: - 8 x USB 3.2 Gen 1 ports (4 ports on the back panel, 4 ports available
through the internal USB headers) Chipset+USB 2.0 Hub: - 4 x USB 2.0/1.1 ports
available through the internal USB headers 1 x 24-pin ATX main power connector 2
x 8-pin ATX 12V power connectors 1 x CPU fan header 1 x CPU fan/water cooling
pump header 4 x system fan headers 4 x system fan/water cooling pump headers 3 x
addressable RGB Gen2 LED strip headers 1 x RGB LED strip header 5 x M.2 Socket 3
connectors 4 x SATA 6Gb/s connectors 1 x front panel header 1 x front panel
audio header 1 x USB Type-CŽ header, with USB 3.2 Gen 2x2 support 2 x USB 3.2
Gen 1 headers 2 x USB 2.0/1.1 headers 1 x noise detection header 2 x
Thunderbolt? add-in card connectors 1 x Trusted Platform Module header (For the
GC-TPM2.0 SPI/GC-TPM2.0 SPI 2.0/GC-TPM2.0 SPI V2 module only) 1 x power button 1
x reset button 1 x reset jumper 1 x Clear CMOS jumper 2 x temperature sensor
headers Voltage Measurement Points 1 x Q-Flash Plus button 1 x Clear CMOS button
2 x SMA antenna connectors (2T2R) 1 x DisplayPort 1 x USB Type-CŽ port, with USB
3.2 Gen 1 support 2 x USB Type-CŽ ports, with USB 3.2 Gen 2x2 support 7 x USB
3.2 Gen 2 Type-A ports (red) 4 x USB 3.2 Gen 1 ports 1 x RJ-45 port 1 x optical
S/PDIF Out connector 2 x audio jacks iTEŽ I/O Controller Chip Voltage detection
Temperature detection Fan speed detection Water cooling flow rate detection Fan
fail warning Fan speed control * Whether the fan (pump) speed control function
is supported will depend on the fan (pump) you install. Noise detection 1 x 256
Mbit flash Use of licensed AMI UEFI BIOS PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS
2.7, ACPI 5.0 Support for GIGABYTE Control Center (GCC) * Available applications
in GCC may vary by motherboard model. Supported functions of each application
may also vary depending on motherboard specifications. Support for Q-Flash
Support for Q-Flash Plus Support for Smart Backup NortonŽ Internet Security (OEM
version) LAN bandwidth management software Support for Windows 11 64-bit E-ATX
Form Factor; 30.5cm x 26.0cm