GIGABYTE Alaplap S1700 Z790 AERO G INTEL Z790, ATX CPU LGA1700 socket:
Support for the 13th and 12th Generation IntelŽ Core?, PentiumŽ Gold and
CeleronŽ Processors* L3 cache varies with CPU * Please refer to CPU Support
List for more information. Chipset IntelŽ Z790 Express Chipset
Memory Support for DDR5 7600(O.C.) /7400(O.C.) /7200(O.C.) /7000(O.C.)
/6800(O.C.) /6600(O.C.) / 6400(O.C.) / 6200(O.C.) / 6000(O.C.) / 5800(O.C.) /
5600(O.C.) / 5400(O.C.) / 5200(O.C.) / 4800 / 4000 memory modules 4 x DDR5
DIMM sockets supporting up to 128 GB (32 GB single DIMM capacity) of system
memory Dual channel memory architecture Support for ECC Un-buffered DIMM
1Rx8/2Rx8 memory modules (operate in non-ECC mode) Support for non-ECC
Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules Support for Extreme Memory
Profile (XMP) memory modules (Please refer Memory Support List for more
information.) Onboard Graphics Integrated Graphics Processor-IntelŽ HD
Graphics support: 1 x USB Type-CŽ port, supporting USB 3.2 Gen 2 and
DisplayPort video outputs and a maximum resolution of 4096x2304@60 Hz *
Support for drawing tablets and 20V@3A of power delivery. * Support for
DisplayPort 1.4 version and HDR. 1 x HDMI port, supporting a maximum
resolution of 4096x2160@60 Hz * Support for HDMI 2.0 version and HDCP 2.3.
(Graphics specifications may vary depending on CPU or graphics card support.)
Audio RealtekŽ ALC1220-VB CODEC * The back panel line out jack supports
DSD audio. High Definition Audio 2/4/5.1/7.1-channel * You can change the
functionality of an audio jack using the audio software. To configure
7.1-channel audio, access the audio software for audio settings. Support for
S/PDIF Out LAN IntelŽ 2.5GbE LAN chip (2.5 Gbps/1 Gbps/100 Mbps)
Wireless Communication module IntelŽ Wi-Fi 6E AX211 WIFI a, b, g, n, ac,
ax, supporting 2.4/5/6 GHz carrier frequency bands BLUETOOTH 5.3 Support for
11ax 160MHz wireless standard and up to 2.4 Gbps data rate (Actual data rate
may vary depending on environment and equipment.) Expansion Slots CPU: 1
x PCI Express x16 slot, supporting PCIe 5.0 and running at x16 (PCIEX16) * The
PCIEX16 slot shares bandwidth with the M2C_CPU connector. The PCIEX16 slot
operates at up to x8 mode when a device is installed in the M2C_CPU connector
* For optimum performance, if only one PCI Express graphics card is to be
installed, be sure to install it in the PCIEX16 slot. Chipset: 1 x PCI
Express x16 slots, supporting PCIe 4.0 and running at x4 (PCIEX4_1) 1 x PCI
Express x16 slots, supporting PCIe 3.0 and running at x4 (PCIEX4_2)
Storage Interface CPU: 1 x M.2 connector (Socket 3, M key, type 25110/2280
PCIe 5.0 x4/x2 SSD support) (M2C_CPU) 1 x M.2 connector (Socket 3, M key, type
22110/2280 PCIe 4.0 x4/x2 SSD support) (M2A_CPU) Chipset: 1 x M.2
connector (Socket 3, M key, type 22110/2280 PCIe 4.0 x4/x2 SSD support) (M2Q_SB)
1 x M.2 connector (Socket 3, M key, type 2280 PCIe 4.0 x4/x2 SSD support)
(M2P_SB) 1 x M.2 connector (Socket 3, M key, type 2280 SATA and PCIe 4.0 x4/x2
SSD support) (M2M_SB) 4 x SATA 6Gb/s connectors RAID 0, RAID 1, RAID 5, and
RAID 10 support for NVMe SSD storage devices RAID 0, RAID 1, RAID 5, and RAID
10 support for SATA storage devices USB Chipset: 2 x USB Type-CŽ ports,
with USB 3.2 Gen 2x2 support (1 port on the back panel, 1 port available through
the internal USB header) 1 x USB Type-CŽ port on the back panel, with USB 3.2
Gen 2 support 2 x USB 3.2 Gen 2 Type-A ports (red) on the back panel 2 x USB
3.2 Gen 1 ports available through the internal USB header 2 x USB 2.0/1.1
ports on the back panel Chipset+USB 3.2 Gen 1 Hub: 4 x USB 3.2 Gen 1
ports on the back panel Chipset+USB 2.0 Hub: 4 x USB 2.0/1.1 ports
available through the internal USB headers Internal I/O Connectors 1
x 24-pin ATX main power connector 1 x 8-pin ATX 12V power connector 1 x
4-pin ATX 12V power connector 1 x CPU fan header 1 x water cooling CPU fan
header 4 x system fan headers 2 x system fan/water cooling pump headers 2
x addressable LED strip headers 2 x RGB LED strip headers 5 x M.2 Socket 3
connectors 4 x SATA 6Gb/s connectors 1 x front panel header 1 x front
panel audio header 1 x USB Type-CŽ header, with USB 3.2 Gen 2x2 support 1 x
USB 3.2 Gen 1 header 2 x USB 2.0/1.1 headers 1 x noise detection header 2
x Thunderbolt? add-in card connectors 1 x Trusted Platform Module header (For
the GC-TPM2.0 SPI/GC-TPM2.0 SPI 2.0 module only) 1 x serial port header 1 x
Q-Flash Plus button 1 x reset button 1 x reset jumper 2 x temperature
sensor headers 1 x Clear CMOS jumper Back Panel Connectors 2 x USB
2.0/1.1 ports 2 x SMA antenna connectors (2T2R) 4 x USB 3.2 Gen 1 ports 1
x DisplayPort In port 1 x HDMI 2.0 port 2 x USB 3.2 Gen 2 Type-A ports (red)
1 x USB Type-CŽ port, with USB 3.2 Gen 2x2 support 1 x USB Type-CŽ port
(DisplayPort), with USB 3.2 Gen 2 support 1 x RJ-45 port 1 x optical S/PDIF
Out connector 2 x audio jacks I/O Controller iTEŽ I/O Controller
Chip H/W Monitoring Voltage detection Temperature detection Fan
speed detection Water cooling flow rate detection Fan fail warning Fan
speed control * Whether the fan (pump) speed control function is supported
will depend on the fan (pump) you install. Noise detection BIOS 1 x
256 Mbit flash Use of licensed AMI UEFI BIOS PnP 1.0a, DMI 2.7, WfM 2.0, SM
BIOS 2.7, ACPI 5.0 Unique Features Support for GIGABYTE Control
Center (GCC) * Available applications in GCC may vary by motherboard model.
Supported functions of each application may also vary depending on motherboard
specifications. Support for Q-Flash Support for Q-Flash Plus Support for
Smart Backup Bundled Software NortonŽ Internet Security (OEM version)
LAN bandwidth management software Operating System Support for
Windows 11 64-bit Support for Windows 10 64-bit Form Factor ATX
Form Factor; 30.5cm x 24.4cm